in

5 Tips To Building A Fire Pit On Your Property

If you love hanging out in the wilderness, you would probably benefit a great deal from building a fire pit on your property. A fire pit is a great way to bring people together for socializing and enjoying the outdoors. It also provides a source of heat and a way to make food if that is of interest. Building a fire pit can be a great addition to your property and does not have to cost a lot of money. In fact, you can install a fire pit on your own. This article will provide some tips to help you.

  • Find a good spot. Survey your property and find a good spot that is open and has enough space for a fire pit and seating. You will want to do some research and find out if you have to get permits or permission from the local municipality in which you live before you begin to build the pit. It would be a detriment and a waste of money to build the pit to only find out later that you are without a permit and are unable to use it.
  • Prepare the area and install a base. Once you have determined a space and you have received any necessary permits, you can then prepare the area and install a base. You may need to dig a space in the ground and an easy way to do this is to hire mini excavator rental in Vancouver.

After you have prepared the area for the pit, you can then create your base. To do this you will need to obtain some thick stones and use measuring tape. Measuring the area is important to make sure that you have a space that is of good circumference. Be sure to create a wall of solid rock at least 24 inches from the middle of the pit. You will want to make sure that your rocks are placed against each other in a manner that does not allow for room in between. When you lay down additional layers of rock, be sure to stagger them so that you can create a solid base.

  • Add a fire ring and fill in the gap between the ring and base. Check your local hardware store for some extra steel and obtain two large pieces that you can bolt together to create your fire ring. Once it is added to the pit, you can then pound it down into the ground a bit so that it stays in place.
  • Add stones. Because the stones and the steel fire ring will not lay flat against each other, you will need to add small rocks in between the layers so that it will not move or budge in various weather elements. Once this has been completed, you can go back around and add masonry adhesive to your rocks so that they stay in place. The reason that you do not want to do this during step 2 is because you may need to move things around during step 3. Once you have completed steps 1-4, you can then apply the adhesive.
  • Add seating and enjoy. The fire pit is now complete. In order to be able to use it, you will need to add seating. Some choose to make seating out of old logs, while others choose to purchase adirondack chairs for their fire pit. Whatever you choose to do, be sure to enjoy the fun addition to your property.

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Loading…

0

5 Tips On Choosing The Right Dentist

5 Tips To Selecting A Responsible Dog Walking Service In Your Area Today