Plumbing pipes are bound to get damaged over time. Damage occurs due to age or other factors. Thus, you’ll need to repair them when they have worn out. You can use various techniques for repair, including the newest in the industry, cured-in-place pipe (CIPP) lining.
CIPP lining is a non-invasive pipe repair procedure. This is unlike traditional invasive techniques, such as excavation.
Are you wondering what else this innovation offers? This article will help answer this question by discussing the advantages of CIPP lining.
1. Saves Time
Replacing pipes using the traditional method takes time to execute. It involves land clearing, excavating, removing damaged pipes, replacement, and covering the ground. This process could take a whole week to complete, especially if you don’t have enough labor force on standby.
However, the CIPP liner solution reduces this time to two to three hours. There’s no need to clear your land or do any excavations. You’ll fix the damaged pipe from its current position. Once the professionals identify the areas that need repair, they only have to put in the lining. Lining the damaged pipe takes at least 20 to 30 minutes, depending on the length of the tube. The installation time extends to hours due to the curing process. Either way, it can barely extend to more than three hours. The workers will be in and out of your premises within no time. Hence, you’ll utilize your pipe as soon as possible.
2. Saves Money
Repairing a broken underground pipe stresses most homeowners, especially if the cost would pose a dent in their pockets. With the traditional techniques, you have to buy a new pipe, hire labor, hire an excavator, and even seek permits, depending on the state. Permits will often be necessary due to all the disturbance the process will bring. All these costs cumulatively amount to high figures.
With CIPP lining, the cost factor shouldn’t concern you too much. You won’t have to buy new pipes or worry about labor. CIPP professionals have the equipment and personnel to execute the task at hand. You’ll get their services at a fixed rate, lower than getting the resources independently. The fact that the process only takes a few hours also reduces the costs significantly.
3. Quality Services & Results
Both traditional and CIPP lining techniques offer quality results with the final product. However, CIPP lining offers a higher-quality outcome. How is this possible?
The lining in CIPP is smooth, which contributes to the better flow of any liquid passing through the pipe. The smoothness also eliminates situations where debris sticks to the surface of the lining. This debris will affect the speed of flow.
Meanwhile, most pipes aren’t smooth on the inside when employing the traditional technique. This allows substances to stick to their surfaces, leading to blockage.
The traditional technique requires conjoining many pipes, especially if the damaged one is long. These joints often become a source of issues in the future, such as root infiltration. This occurs when roots from nearby find their way into the pipes, considering the pipes ferry water. They’ll get in through the joints, and over time, they’ll grow. This means they’ll interfere with water flow, reducing its pressure and leading to blockage in the pipe. In extreme cases, they’ll break the pipes, forcing you to go back to square one.
CIPP lining installation is also continuous; hence, roots wouldn’t reach your pipes. Your pipes will serve you for a long time, keeping up with your end goal.
4. Environmentally Friendly
Taking care of the environment is an essential duty of everyone. In general, a poor environmental condition can affect the quality of your life.
Traditional pipe replacement techniques displace the environment and cause disruptions in many ways. You have to excavate the ground where the broken pipe is. Excavation means eliminating all the green areas in that area, such as grass and flowers. If you replanted them once you’ve repaired the pipes, this wouldn’t pose a problem. You can seek landscaping services to help with the replanting. This is crucial because bare land is a great contributor to landslides and soil erosion, especially if you are in a high area.
Moreover, the traditional technique pollutes the environment because the broken pipes are thrown away nearby in most situations instead of disposing of them responsibly.
With CIPP lining, however, you’ll protect the environment. There’s no situation where you’ll have to tamper with vegetation or worry about disposing of the broken pipes. CIPP lining is also a quiet procedure compared to the traditional techniques; you won’t need to use excavators that emit a lot of noise.
Conclusion
CIPP lining is a technology you should consider adopting in your plumbing requirements, either large or small scale. Adopting this technique has been well discussed here. However, the decision is yours, so make the right choice.
John Davis is a passionate content writer with a knack for crafting engaging narratives across various subjects. With a keen eye for detail and a love for storytelling, John brings ideas to life through the power of words. His dedication to delivering high-quality and informative content has made him a trusted voice in the digital realm. When he’s not at his desk, you’ll find John exploring new hobbies and seeking inspiration in the world around him.
Loading…